Another one: Mirror cover handle screws were too long, had to grind them down or they would have punched right through the cover.
Most of these problems are little things, and none of them insurmountable, but the list is growing:
- Shipping damage to truss poles, mirror cell back, mirror box sides, secondary cage cover.
- Wrong ground board foot supplied.
- Lower truss clamp block split almost in half.
- Lower truss clamp blocks not square
- Poor accuracy of mirror cell components.
- Altitude bearing extension inner radius wrong diameter.
- Secondary cage struts too long.
- Filter slide mounting pilot holes wrong.
- Mirror cover handle screws too long.
- Azimuth brake too short.