View Single Post
  #2  
Old 31-07-2018, 05:58 PM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
Hi Aaron, it sounds like ' End play ' in the worm drive just do a google as there are plenty of good articals and video's on utube on how to adjust these , I had one for years and after a bit of adjusting it never needed touching again , these are good work horse mounts .

Dont be tempted to adjust anything until you have studied up a lot as if you over tighten the block you will damage the gear ( it's only alloy , not brass and the worm drive is stainless ) and its stuffed so it will need replacing .

Good luck , it's not hard .

Brian.
Reply With Quote