Thread: AP Mach1 Issues
View Single Post
  #5  
Old 27-06-2018, 05:03 PM
darrellx's Avatar
darrellx (Darrell)
Registered User

darrellx is offline
 
Join Date: Dec 2007
Location: Kulgun, Queensland
Posts: 278
Yes, and email has been sent. Lets see how long it takes for a response!

On the issue of the Adapters for the Pier. The items supplied do not match what I was able to find online.

I was expecting the 119FP Flat Pier Plate and the ADATRI. But this is what I received. So I am trying to work out how this might be used.

On the Flat Pier Plate there are eight holes, marked as 1. These appear to be used to attach the ADATRI by screwing up from the bottom. I was expecting another set of holes on a smaller circumference to attach the Flat Pier Plate to my Pier. I am not sure now how this can be attached to the Pier.

But I am wondering if I now need the Flat Pier Adapter at all. I have a very flat plate welded onto the top of my Pier. Would I be able to just use the three holes on the ADATRI, marked in green as 2 and screw the ADATRI directly to the top of my Pier? Or maybe even use the eight holes on the outside of the ADATRI that were used to secure the Flat Pier Plate.

I think three screws would be enough, or if necessary use the eight. Maybe!

Any thoughts?

Darrell
Reply With Quote