View Single Post
  #7  
Old 06-06-2018, 12:31 AM
kens (Ken)
Registered User

kens is offline
 
Join Date: Oct 2014
Location: Melbourne, Australia
Posts: 314
Next session do a calibration near the meridian and celestial pole. Do this both before and after our drift alignment. The run the Guiding Assistant tool and follow its recommendations. Make sure you do the backlash check as there are signs of backlash in your log.
If the short runs in the log are your drift alignments they look too short for the trend line to settle. In the end you got it reasonably good at 6'. 5' is better but 6 is near enough for most purposes.
Reply With Quote