Good idea to replace them!
Quote:
Originally Posted by tim.stephens
Another word of warning, be careful with all those little grub screws on the prism mount when adjusting. Don't do them up too tight and be sure not to drop any on the grass! Gone forever. There are quite a few on the front and sides to loosen when moving the prism.
Also, depending on your imaging weight,the finger tight screws on the side of the main OAG body may not be enough to hold your equipment in place. Just be careful that everything is orthogonal when assembling. I replaced mine with hex bolts and tighten firmly with a allen key.
|