|
Hi Jeremy...
The Led driver is not suitable for things like motors or scope controllers where you need a constant voltage. LEDs require a constant current and the supply will try to match that need by varying the voltage. You may end up frying your gear. At best your motors won't run properly.
A PC power supply with a 12v rail would be better.....but this would be a true 12v...not 13.8 like a car battery,
Which is what most "12v" devices are expecting
The 13.8 volt supply is rated at 20amps which should be more than adequate, its a good price and comes with an Aussie warranty.
|