|
I am out ATM so I don't have all spec to hand will post when I get home.
I know it has 80mm of travel.
It has a male thread for direct connection of stuff to the focusing tube I think it's m68 will check.
It rotates on the m95*1 flange.
10:1 focus knob
1.25 and 2" compression rings
Will post the rest once home.
EDIT:
Here are the specs from the manufacture.
Type: Rack & pinion focuser
Payload: 4 kg
Connection thread at the telescope side: M82x1 (female)
Connection at the eyepiece side: 2", 1.25" and M63x1 thread (female)
Shortest height from the M82 thread to 2": 131 mm
Travel: 80 mm
the connection thread at telescope side says M82x1 which is true but that is for the focuser unit only I am including the flange that goes up to M95 and allows rotation of the focuser.
Is this what your after Rom?
Regards
Grady
Last edited by stanlite; 25-03-2018 at 06:32 PM.
|