View Single Post
  #4  
Old 20-01-2018, 10:38 AM
ChrisV's Avatar
ChrisV (Chris)
Registered User

ChrisV is offline
 
Join Date: Aug 2015
Location: Sydney
Posts: 1,797
+1 check handcontroller has at least 50% for autoguiding. And then check it is the same rate in phd2 - it should be set automatically in phd2. It does this when I use an ascom connection with a cgem mount ( found this better than direct from camera with the st4).

Or maybe you have a dodgy st4 cable?
Reply With Quote