Been having a beatch of a time getting the new 10inch F4 scope to work well, mainly caused by probs with the autoguider getting correct focus and being far too flimsy (I bought a 9mm deep TS-OAG9 due to backfocus constraints but it had a number of looseness issues. I wouldn't recommend it unless you are desperate to save millimeters)
So this was the first remotely decent image I've obtained for months. My guiding is still poor imho, as the foam ring setup that Alistair kindly set up for me has deteriorated already, the rest of the setup is rock solid, but if you touch your finger on the OTA you can see it move very easily, it's like imaging with the scope resting on a pillow! So can't wait for the new rings to arrive within a month.
So anyway, enjoy this brief demonstration of my light-sucking setup. 10 inch F4 combined with 8.4 micron sensor buckets. Took 60 shots of 40 seconds, but only 36 of the pics were acceptable due to clouds flitting in and out. So alas, only 24 minutes of OSC. So sad. Will nab this sucker with longer subs and more data if it kills me!
Higher rez