|
Gday Peter
I actually used Metaguide
Basically, i started EQMod and bring up the dialog with the new buttons for PEC.
Then i connect with Metaguide ( or PHD2 )
Ensure PPEC is OFF
Set up the guide app and calibrate
Let it run without guide commands for a worm turn or 2 to get a PEC off unguided baseline.
Start Guiding as per normal, and when steady, use the new button in EQMod to start PPEC training.
The power switch on the mount starts double flashing.
When the PEC sensor detects, the mount starts logging the errors.
When its finished a full turn of the worm, just stop the PPEC train using the button.
Then turn PPEC ON and turn OFF guider commands to the mount.
Plot the result to see how well it works
Andrew
|