G'Day g_day.
Here's the go mate! It's not too difficult, really (I had some trouble getting my head around it to start with too!)
1. When you fire up your mount, choose "
Quick Align" not "Auto Align".
Quick align just models the sky in the controller, it makes no adjustments for cone error, etc.
2. Do your drift alignment.
3. After doing your drift alignment, run it through the full "
Auto align" procedure. You may have to power it down to do this, I think?
Try it straight from the menu first
.
Once accurately drift aligned and the cone error has been calculated by the auto align, from then on you should be able to use the "
Last Alignment" option on start up.
That should get you going!
Al.