Quote:
Originally Posted by Crushellon
That won't work for me as I'm using a full frame camera, I need to use all m48 to keep the open aperture for the sensor size. I'm just gonna lathe down the m48-eos adaptor down so it's closer. I wasn't aware that the TS oneswere shorter though, do you know if they are suppose to be 10mm for the usual 55mm that canon cameras usually have with an adaptor on?
|
Tim, i am not suggesting you copy my setup. I realise your full frame and need to carry the 2" tube to the bayonet. Perhaps i was going into too much detail. The intent of the photo was to show the depth of the M48 thread in the front of my 2" section, which should resolve your reducer attachment issue. I suspect you are using a 2" front section with a filter thread cut in it, which is only deep enough to screw in a filter. If you were using something like a 2" variable tube, they are always tapped for significant depth to accomodate the reducer thread.
I will stay out of it from here.