Quote:
Originally Posted by Merlin66
2. Image 2 shows the USB to Serial adaptor... one end is plugged into your USB port on the computer and the other should have the USB cable from the camera. (this allows the camera to send images to the computer -which are then used by your software to guide...)
.
|
Here I am a little confused probably I need another section of cable to replace the female section.
But it seems that I must remove the current female plug section of cable which goes to a st 4 ( phone type connector ) and replace that with a lead that has a female serial adaptor one end and a usb into which I plug the camera.
Does that sound correct?
Alex