|
Hi Andrew, coffee would be great but I am stretched very thin until the middle of the week after next so probably can't make it before then.
Two ways you can approach the problem:
1. Write the intermediary driver - take the ASCOM template for focuser and then pass all the calls to the DLL of the original driver. Then you only need to modify the position reading to include the tolerance.
2. If you have the focuser commands, you can probably use an existing ASCOM focuser source code (there are few on the net) as a starting point and then just re-implement the commands.
Just wondering, is this a problem with your focuser or with the model? If latter the manufacturer should be fixing the issue?
|