Quote:
Originally Posted by Graham Beazley
Hi Alan.
Remove the back from the controller and reseat the ribbon cable into its socket and see how it goes from there. Just slide out the two little black lugs each side of the socket and make sure the cable is pushed right home the push the lugs back in.
These controllers and you are sure not compatible what with your rotten luck.
Cheers
Graham
|
Thanks Graham done that and as you mentioned it may be faulty leds.
Going to see my techy tomorrow and see if he can replace them or change over the ones from my old controller.
Now get back to bed and get better so you can work out a price for a EQ mount for me.
Al