|
Dual imaging
OK, crazy idea for the day - just not sure if it will work computer wise...
I have 2 imaging scopes - one an f/5.6 refractor system using an ST-2000XM CCD and an ASI120MM guidecam. The other is an f/5 refractor using a DSLR. Mounted side by side on a goto mount.
So, can I run simultaneously say APT for the DSLR and MaxIM for the CCD for data acquisition, and then PHD2 for guiding...or is there going to be weird conflicts regarding downloads and data management trying to run all this?
EDIT: if I use the shutter-sensor pause (open shutter, but not start sensor until vibration stops) function to coincide with the download of the CCD it should work, provided I use the same length subs etc I would assume?
Last edited by LewisM; 30-05-2017 at 06:09 PM.
|