Quote:
Originally Posted by LucasB
Have you tried a 15V power supply? It could be a voltage drop problem which can be resolved using 15V. The manual stipulates you can use 11-15V. If you google NEQ6 and flashing power light you should find some advice on the issue. For me, it occurred mainly when slewing when the mount was drawing the most power. Using 15V solved the issue for me. Others have used 13.8V with success also.
|
Hmmm...
If manual mentioned 11V as minimum, that means the mount MUST work correctly down to 11V
(at power terminal on the mount), otherwise the mount (or whatever appliance it may be) is faulty.
15V as maximum voltage means you are NOT supposed to cross that limit, because the appliance could be damaged.
EDIT:
Added comment in red.