|
Hi David,
I can confirm the FIT-PC2i comm port works with the AAG CloudWatcher hardware. Last year I upgraded from a FIT-PC2 to IPC2 in my dome, the performance improvement was massive for things like plate solving. I did try to communicate with my Garmin 18x LVC gps receiver (from the IPC2), no luck trying to get the PPS signal working. Maybe it was the adapter dongle.
Anything that doesn't need flow control or CD/DTR/etc pins should be fine with the Tx/Rx only ports.
Unfortunately I can't try anything for you right now (the obs is 700km away).
Best,
EB
|