Another gadget from "Kunama Optics"
After testing the AZ-EQ6 GT with the TOA130NFB recently, both Phil and I agreed that the EQ6 tripod suffers from Delirium Tremens with the image bouncing about anytime the focuser is touched......
Today's weather gave me the ideal opportunity to do a little bit of DIY....
The spreader has quick release clamps which allow for varying the tension easily, the bars are 16mm square solid bar and all fittings are stainless steel...
Time take: 5 hours
Material cost: $84.75
Other consumables: 2 x Stella Artois, Autosol Paste, Lots of 'Elbow Grease"
Next on the agenda is a bracket for the AZEQ6 hand control to be mounted on the head not the tripod.