Quote:
Originally Posted by DJScotty
About to give that a crack tonight inbetween clouds. The camera screws directly into the filter wheel via a 5mm m54 thread. So if I pack shims inbetween the front flange of the camera and the FW at the appropriate corner that should do the trick right?
|
Yes that would probably work. In my case the camera inserts with a dovetail so you can pack it to some degree before it affects the other corners.
You may have to hold the shim when screwing it in as at some point its going to grab and spin the packer with it.
Alternatively you could put it before the filter wheel if there is a dovetail fitting in your system.
Greg.