|
Luka, remove the metal tab, it is only there as an earth path and there are others. If you bend it back and forth it will break off near the base eventually, that is safer than trying to cut it off with a dremel tool and creating metallic dust. Rowland may have done something different. Trim the plastic as required if it still hits the finger, but leave the long tongue which has the screw hole in it, depending on your finger width you might have to shave it slightly but you need it. I used a hack saw blade to cut the plastic along side the screw tongue which you must retain then some sharp electronic flush side cutters to nip the plastic tongue to shape. It is soft plastic and will not crack and run, just take it slowly and refit to test as you go along.
|