Hi there all...
With the 1000 camera back in the UK for the THIRD time, I thought it was time to do something I had put off for a LOOOONG time... Get in and clean the worm and drive gears on my AZEQ6 mount.
After lots of web searches I came up with very few suitable guides for doing this for this specific mount.
SO, I thought I would write my own guide to assist those AZEQ6 owners who wished to do the same thing.
Download from here (I promise this is not a virus etc)
https://www.dropbox.com/s/9wmcja2kui...final.pdf?dl=0
If you have any feedback or questions, please feel free to text or call on 0422 690 380
Cheers,
DJ Scotty
