|
I have found that Memory card problems in the 450D can be due to the top connector on the main processor board. That card module ribbon is designated by the letter (I) in Gary Honis' mod guide, this pulls out on one side slightly due to the hard bend it takes to the memory card board connector underneath. The problem may simply be a bad ribbon connection there. I have some spare 450D parts, let me know if you think you have a bad board we might be able to work something out.
Btw debayering a sensor is not an easy task, you may ruin a couple before you get a good one, i certainly did. Feel free to ask anything.
Last edited by glend; 09-05-2016 at 08:10 AM.
|