Quote:
Originally Posted by gregbradley
I noticed in Pempro the other night there is a feature to shift the curve.
I wonder if that may be of use.
Greg.
|
interesting ... i will have a look into that but not sure if that will solve the issue
Quote:
Originally Posted by PRejto
OK, that is valuable information. It seems likely that the RA worm was not damaged. I woudn't post your scenario.....
You probably know this but both worms are identical. You could try swapping the worms to see if the basic PE of the dec worm is inherently better. My MX (and MEII) both had just over 3 arc-sec to start with. I'm sure that makes it easier to correct.
Does PEMpro distinguish between the original MX and the MX+? I'm not sure they share the same worm period. That would for sure mess up the correction!
Peter
|
i can give it a go to swap out the worms and see if that fixes the issue, but the Dec worm might have its own issues from the balance problems. PEMpro only has a PMX option, not a PMX+ but i am sure that wouldn't be the issue, i am not the only one to run pempro with a PMX, besides, this started before i used pempro. i started using pempro to investigate the issue. prior PEC training was done in TSX