View Single Post
  #6  
Old 25-04-2016, 12:35 PM
Paul Haese's Avatar
Paul Haese
Registered User

Paul Haese is offline
 
Join Date: Jan 2009
Location: Adelaide
Posts: 9,991
Quote:
Originally Posted by alpal View Post
Nice image Paul,
It's an excellent scope -
yes the center stars are perfect while the ones in each corner
are slightly elongated.
I don't know if it's worth a flattener or not?

cheers
Allan
Its just more for the sake of perfection than anything else. I have been advised about some software that will deal with the corners so I will give that a go.

Quote:
Originally Posted by Placidus View Post
Wow! The contrast and sharpness in this image are a pleasure to see.

You've encouraged us to clean our primary mirror (which is looking alarming. Perhaps that will help with our contrast too.
I noted that my images were starting to suffer from what looked like progressive fogging over the course of a night. So one task was to eliminate all the possible causes of this occurrence. So far this seems like this was the problem.

Quote:
Originally Posted by gregbradley View Post
Yeah that's real nice Paul. Remarkable detail in the brighter areas of 3576.

Top of the image corners show a tad more elongation than the bottom so I'd say you need to pack out the bottom of your camera a tad (.2mm). A bit of brass shim should even it out.

Greg.
This might well be the crop I used Greg. I have some shims but have found another issue looming where it looks like using the rotator is causing some tilt. I suspect something is not housed properly and will need a bit of a look in the coming weeks.

Quote:
Originally Posted by Slawomir View Post
It is great that you got your camera back Paul. I admit I carefully compared your image to mine and I really like how your image is so sharp and stars are very tight.

Looking forward to the completed project Paul.
I did likewise Suavi prior to posting my image. I noted that your image was quite sharp at the time of viewing it and was curious as to whether my image was of the same sharpness.
Reply With Quote