|
Eureka the magic happens
Firstly a very big thank you to the blokes at Bintel, a couple of emails from them sorted my problem. I thought I had downloaded a driver for usb port but the second attempt worked. Then! magic, start Skytools, tell EQMOD to unpark the telescope,put up a Skytools observation list, select an object then hit the slew to button. Away it went.
So when the clouds clear I look forward to using the EQMOD polar alignment routine, it has to be easier than cycles though through Synscan's 3 star align polar align routine, although in fairness those cycles do attain about 10 seconds claimed error on polar alignment and the goto accuracy at 180X reflects this.
Again thanks Strawb and Bintel.
Chris
|