|
RA drive ctd
Thank you all for the great info. Very much appreciated.
It looks just like the EQ3 you scored Bojan despite the off white colour. Very snazzy job and clarified how a drive can be mounted. I will have to do some boning up now.
On the matter of the number of gear teeth it takes 6 full turns of the worm shaft to do 1/12 of the 180 degrees. I ran it for 60 degrees and that was right on 24 turns so that has got to be 72 for the 180 degrees and led me to think the final gearing should deliver 0.1rpm. Does that sound right for a normal EQ3 in case this is a clone? Is the final gearing rpm usually specified with commercial motor drives?
|