Quote:
Originally Posted by raymo
If tilt is the problem, having the camera directly above or below the scope
would fix that, I would have thought. Is the cooler box a commercial one,
or home made? looks good.
raymo
|
I made sure the thumb screws are tight tight, ill check the movement when I get home. Maybe the tube/focuser is bending slightly via the weight. This is the first time back into it after 3 old yrs, may have jumped the gun. I'll also make sure collimation is spot on, then try again. I'll report back, fingers crossed I can work something out without having to replace any equipment.
Thanks, I made the cooling box on my days off
