|
Matthew, I don't think the hand controller is at fault; This mount has had
this problem on and off for a long time, before the hand controller packed
up and I got this new one. I'm pulling out the motherboard for a visual
inspection.
Ken, since owning this mount, a 2 star alignment has always provided
adequate tracking and Go To, [when working properly], so I have never used P.A.E. I have tried the polar alignment function, and got no benefit from it. The motors and direction buttons have always functioned faultlessly, so it is looking more and more like the MCU is faulty.
I will clear the P.A.E. data, and look at the show position function.
Thanks Ken.
raymo
|