|
Good suggestion Rowland. When I get my sensor back for the mono build I will be spraying (not the sensor but everything else). Sensor will be masked off.
This brings up the subject of the sensor cover glass fogging. Even if you remove both the stock filters the sensor coverglass is still there. There is a good utube video showing how the stock coverglass reflects light compared to an MC clear coverglass. CentralDS has to remove the coverglass to debayer the sensor so I have asked them to leave it off (they wanted another $150 to replace it with a MC clear one). I will deal with that when I get it back. There is a cheaper clip-in clear I can use. But the point being I need to engineer a sealed chamber, or dessicant chamber in front of the sensor surface.
Last edited by glend; 20-11-2015 at 02:41 PM.
|