Quote:
Originally Posted by Camelopardalis
Another update...I've modified the cold finger to enter through the right hand side and avoid a bend. As a rough (really rough!) experiment, I stuck the Peltier on the end of the cold finger (about 50% contact) and the heatsink perched glancingly on the Peltier with another 50-60% contact...it's been running just over an hour and I'm seeing a temperature drop of about 10C in the exif data compared with the subs I took before switching the cooler on. I need to work on the box next, and solve the precarious kitchen worktop situation!
|
Need pictures !
I am contemplating that option rather than the bends involved in coming from the left side. I have perused all the pix but haven't opened up the 450D yet to get a proper 3D look at it all.
As the card slot is not used I figured that might be a good entry point but I need to take a proper squizz at it all myself. I don't want to start this till I have enough free time and we're heading into silly season and a company building shift over Xmas. It's going to be hectic.
But pix would be nice, angled off bottom right of the camera might give me an idea of spaces and finger entry.