|
Really grateful for any help. Had the kit SSF running fine under Win8.1 and then accepted the Win10 upgrade. Still went perfectly. However, Win10 fell over for other reasons and had to be "reset" which reloads the OS and turfs out all the apps (keeps data files though). Am in the process now of rebuilding the automated astro stuff and have everything running fine, except for the SSF. I have Ascom driver 3.15, client 1.17 and have loaded everything with admin priv. A DLL appears in the right place and the client says it is connected to the focuser, but the focuser just does not move - works alright with the rotary encoder though. Nothing doing with SGPro either. One thing I did notice was that the max step length is now 30ms -my vague recollection is that the original system allowed longer steps.
Can anyone think of anything I might do next or can anyone see what I have done wrong? - do I need to reflash the PIC to get it to work with the current software? Looks like I might be putting my old Vista system back into service if it turns out to be Win10 fussiness.. Thanks in advance. Ray
Last edited by Shiraz; 18-10-2015 at 05:55 PM.
|