|
EQ Mount Balancing After Belt Mod?
Recently installed the Rowan Engineering Belt Mod on my NEQ6 Pro. Net research on balancing post the belt mod reveal differing opinions:
1. Balance neutral now as the belts don't allow the slop that the gears used to.
2. Balance east heavy as before because the worm shaft and gear still have slop in them - even if you have adjusted to remove backlash in this.
I have done some imaging test runs with the mount east heavy as before and things are fine, my guide graphs are nice and flat now. But is this no longer necessary?
What's to G O guys?
|