|
Unless you are doing remote I don't see a massive gain in using a rotator on the CDK. I was just using my CDK last night with the reducer and its so easy to simply loosen the 2 tightening bolts and rotate the camera. But if you are using a MMOAG and PWave MMOAG adapter then yes you have to loosen the grub screws and rotate the camera on the MMOAG and then retighten. A careful process, if you loosen it too much the camera can fall off. So I think a little lubrication here would help as it would turn more easily with less back off of the grub screw. I haven't had tilt issues with the CDK17, MMOAG and PL16803 except right at the beginning when the MMOAG prism was too far forward and was preventing the adapter seating properly. But then no problems after that.
Greg.
|