Quote:
thank you very much for the lesson joe
do you work in an optical coating laboratory?
pat
|
I've specialized in stable isotope mass spectrometry past 30 years same as David (Astral Traveller). In addition, these days, I am laboratory manager of a large research school at the ANU. I know the basic theory of thin coatings.
We have small coating units for electron microscopy. These units put a conductive coating of gold or carbon on thin sections but use a different process to that used for mirrors. These coatings are not monatomic and therefore not suitable for optical coatings for telescope mirrors.
We don't have an optical coating units but I have seen optical coating units at other institutions in operation. The correct amount of metal needs to be evaporated to make sure that only a single layer of atoms is deposited otherwise you don't get a flat coating.
At the research school, I purchase the types of vacuum equipment I mentioned in my post for mass spectrometers and other supporting gear. That's why I can quote approximate prices off the top of my head.
It's a very expensive game. Sorry Torana. It sounded like you wanted to buy it. I was just trying to make sure you didn't make a very expensive mistake.
It's some sort of vacuum chamber but it could be anything.
Large vacuum chambers are used in a bewildering array of devices. Looking at the photo's, there was nothing identifying exactly what it came from but there were some clues.
It's probably a bit big for an electron microscopes or electron microprobe. The small ports you can see in the photo are NW style connectors - probably NW25, this indicated it is probably not part of an ultrahigh vacuum system. NW 25's usually have viton o-rings that are suitable for high but not ultrahigh vacuum. NW25's can be fitted with aluminium crush knife edge seals that will hold a higher vacuum than viton but usually, a deicated ultrahigh vac will use a different type of flange called a conflat that has two stainless steel knife edges that cut into a copper gasket made of a special type of annealed copper.
It could be for
electron beam welder chamber
part of a particle beam line from lucas heights
part of a large secondary ion mass spectrometer
outgassing test chamber for making payloads for space launch.
vacuum deposition (aluminizing ) chamber
many more
cheers
Joe