Quote:
Originally Posted by AndrewJ
Gday Colin
4.2G is the latest firmware for the LX200s.
I note in the log that some dross got returned at times
so not sure if that is real or not, or an artifact from the scope or converter.
Another test you could try is to start the scope in safeload mode
( use 999 on booting ). Once it boots,try and connect using my app..
Then just turn off the scope.
The safeload region has its own copy of the rs232 comms code
so if it works and the normal doesnt, it may just be corrupted data.
Note! You must use the rs232 port alongside the Hbx socket for this test, as the safeload code only recognises that channel.
Andrew
|
Andrew,
Used that RS232 port, pushed "999" and it came up with the "Downloading" message on the Autostar II which I assume is what it was supposed to do. I have linked the log from that session as well. I note that it is a little different, not sure why though, I don't really understand what its outputting to be honest.
Thanks a bunch for your input
