Quote:
Originally Posted by PRejto
Greg,
That's how I set my slew limits. I put the scope in the max safe position and set the limit to the current position. Other than that I didn't do anything
I noticed one thing that had some points fail in a T-Point run recently. I didn't notice that I'd accidentally added a couple of user points that were outside my slew limits. They are red and don't stand out from the rest of the points so well, particularly if you are not looking for them. Fortunately they can be deleted from the drop down menu easily.
I wonder if Protrack is working again now for tracking corrections. My 242 point model made tracking worse not better whereas when I used it before on my PME it makes it better. Its like it was sending out the opposite corrections, like something is being labelled plus that should be minus like the PA report was doing.
I might have another go at getting a refined Pempro PEC curve up and running.
Peter
|
Thanks Peter.
I plan to do that next time as the fails from slew limits are a pain.
I didn't know points outside the limits display as red. I'll look out for that.
I've downloaded the latest Build 9037 and we'll see how we go. My TPoint model seems perfect now so it will be next time I need one (hopefully not for a long time, too much mucking around and not enough imaging!).
Greg.