View Single Post
  #3  
Old 05-07-2015, 11:57 PM
raymo
Registered User

raymo is offline
 
Join Date: Sep 2011
Location: margaret river, western australia
Posts: 6,070
Happy for you. If you find it difficult to get the azimuth movement
nice and smooth, an easy fix[if you are reasonably handy with tools]
is to get a 12" diameter thrust bearing from any bearing stockist,
about $30, fit it in place of the Teflon pads. Adjust the centre bolt
so there is no slop, but also no binding.
raymo
Reply With Quote