|
Hi Glen,
I do not use B EOS but I had a similar problem on my set-up using APT. The fault, APT would freeze most or nearly all the time. After a while I found the problem.
My set-up was using a small computer which I am still using yet the Guide Camera USB connector was sharing the same powered USB2 hub to the Canon 450D camera. After 10 weeks of trial and error I found that I would connect the guide camera first then the Canon second. The guide camera was trough-putting too much data to allow the Canon to set-up. APT would then crash not recognising the camera.
To fix I would switch on the Canon first before the guide camera as a short fixed. In my set-up this was a permanent fix although I will on my next set-up use different USB ports to use each camera.
See if this is the same problem. I remember a similar issue with my ASUS Netbook but stop using this computer before clearing the problem.
|