So far so good.
Its very light and rigid for its size.
Seems to dislike any voltage below about 12.1. The power LED starts flashing, and even tho not moving, it pulls around 1 amp.
The supplied handbox holder doesnt work with the pier mount so i will need to make an adapter bracket i think.
PC direct mode works, but not sure if EQMod can see it yet, as it is a new mount type. Also, it is not returning some data re PEC sizes so not sure what happens there yet.
The "native USB" port on the head is really just a means to link to the inbuilt prolific USB2Ser converter, havent figured it out yet as it looks like the mount is hardcoded to connect at 115200, and all my test apps are set to the old default of 9600.
High speed slewing gives a high pitch whine, but no rattles like my EQ6.
The whine is audible, but not loud enough to upset the neighbours.
Fit and finish looks pretty good for the price range.
Dont like the Altitude adjust mechanism very much, and might change that.
For dual scope mode, you can align both scopes in alt, but not sure how easy it will be to remove cone error without using shims or rings.
Thats all so far, still poking
Andrew
|