View Single Post
  #14  
Old 22-04-2015, 11:32 AM
ZeroID's Avatar
ZeroID (Brent)
Lost in Space ....

ZeroID is offline
 
Join Date: May 2010
Location: Auckland, NZ
Posts: 4,949
Quote:
Originally Posted by Akwestland View Post
I know next to nothing on this subject, but, how would a home brew heater pad work for this, these are the ones that people sit their "brew" barrels on to keep them at a constant temp. Could this be put under the foam in the EP box. The only down side is that i am unaware of being able to run them on 12V unless you use an inverter.

Meru, I may be interested on how you put this together for "next to nothing".

Cheers,
Andrew.
I'm using one wrapped around the 102mm Lunt but those things are 240 VAC, not 12 volt. I'm in an Ob close to the house so not a problem but obviously no good in the field. Inverters and the like are notoriously inefficient. If I was going to use mine I'd nick one of the wifes UPS's from work, charge it up and chuck in the back of the car. At 6 watts it would give about 20 hours runtime at least.
I've wrapped an old bath towel around the heater on the Lunt to reduce losses, bulldog clip secures it on. I've also thought about getting a couple more for an EP box and and also the SW 80 f11.
Reply With Quote