Quote:
Originally Posted by jim_bones
Hi all,
Last night I couldn't get AN to align and this morning I think I found the culprit: The yellow and black wires on the ALT encoder have come loose (see attached image).
I am assuming that the yellow cable goes back into slot 2 (Index) and not 1 (Ground)? My other question is how to lock the cable in place on the blue plastic bit?
Many thanks!
- Jim.
|
Hello Jim,
No, that wire is connected to the ground. The index signal is not used. The wire is held by friction - you just need to push it into the slot with some thin piece of plastic if you don't have a special tool.
Best Regards,
Serge.