After the C14 modification, I need a new mount. The EQ6 is really a great mount, but maybe I´m asking them too much mounting the C14 (and the filter wheel, finders, camera...). Because my pocket is not happy about to buy a EQ8,
I have modified a DS16 Meade EQ. Basically I have mount the AR wheel and worm in the Dec. axis, and I have build a new 480 tooth wheel for the AR axis. The AR run really well, but the Dec. will need a modifications. But at least I´m sure that I not will find the C14 in the ground a night when I open the dome.
Now, I need a good seeing, but i don´t know how I can to do it
And I ´m starting to process the images with Astra decons. And I have not idea ... but this is another war, I will ask in the adequate area.
Starting ideas in Autocad
https://lh4.googleusercontent.com/-Q...o/Autocad1.jpg
Ra drive and Picgoto electronics
https://lh6.googleusercontent.com/-t...o/_MG_0865.jpg
The telescope finished (almost...)
https://lh4.googleusercontent.com/-0...o/_MG_0867.jpg
And maybe my best image in this horrible seeing winter
http://alpo-j.asahikawa-med.ac.jp/kk15/j150303f5.jpg