|
At last the rain stopped and that allowed me to get the external skin on the frame. I went with marine ply as I am used to working with that and can get pretty good results. All nail heads have been punched down on the exterior and will be filled prior to finishing. As you can see by the photos it's pretty much just cube at this stage. I should get the roof on today, just need to prime and topcoast the sides and put on the flashing all around. The skirt I will do later. The flooring is external ply flooring panels (with the tongue and groove), sealed with two coats of Bondal timber sealer. The floor will get indoor/outdoor carpet when finished. All the external skin ply is sealed and then will be primed with Bin123 primer and topcoated with Dulux Weathershield. I am leaving the extended rail support posts till later, as the important thing right now is to get it to lockup stage, or at least far enough along so I don't have to fight with tarps if it rains again.
|