View Single Post
  #3  
Old 20-12-2014, 06:40 PM
wasyoungonce's Avatar
wasyoungonce (Brendan)
Certified Village Idiot

wasyoungonce is offline
 
Join Date: Jul 2006
Location: Mexico city (Melb), Australia
Posts: 2,359
Hi John

The Digital drive HC is pretty simple. There is a schematic of it on the Yahoo Gemini site, see if this link works.

Also an image of the back of the PCB here. If the links do not open try the Gemini Yahoo site files section, down the bottom, for: controller.jpg and handcontroller.jpg. You need to be a member...or I can send you them via email...PM me if you need them.

All the buttons do is take +5V (RJ12 (6 pin RJ jack), pin2, black) and allow this to be switched by appropriate button presses to the appropriate out pins:3/4/5/6 to command direction movement. The capacitors are just de-bounce for the switches.

So, is your HC LED on? This shows if you have +5V. Sounds as if this wire is broken somewhere...usually in the RJ jack or lead, this would kill all other button operations..

Do you have a multimeter to trace the wires and connections? Measure for the +5V and that it is getting to the buttons!

If you need more help or have any questions fire away.

Brendan

edit:
Hi Pat...sorry didn't see your thread and would have replied if I did.

Last edited by wasyoungonce; 20-12-2014 at 06:58 PM.
Reply With Quote