|
Hi Niall,
One way to achieve dual use with out too much trouble is to buy a second set of tube rings, one will do . Then attach attach sufficient mass to it via either of the attachment screws to allow it at the mirror end to balance the mass of the camera. Mark the position where balance is achieved with some electrical tape , then when ever the camera is used the balance ring can be attached within a few seconds.
Regards philip
Ps . By rotation of the balance ring about the balance point will also make balance easier to achieve with the camera in any position around the tube.
Last edited by 5ash; 06-10-2014 at 06:08 PM.
Reason: Add
|