Quote:
Originally Posted by Octane
Do you know if there's a debloom script for PixInsight? I will ask SBIG to fix my blooming issue while the sensor cover slip/chamber seal is being fixed. I was looking through old images where I had taken ten minute sub-exposures and there was no blooming. I seem to get them in my 450-second exposures now.
|
I don't think there is a good canned solution, H. I have seen some threads with suggested workflows for fixing blooming, e.g.
http://pixinsight.com/forum/index.ph...34867#msg34867
Quote:
Originally Posted by Octane
The mosaic I was working on was Rho Ophiuchus. I don't know if I will get a chance to finish it this year as it's starting to slip lower and lower. The GradientMergeMosaic process has had a very hard time blending my exposures properly (I'm following the proper methodology, too: register (mosaic/union) with frame adaptation, which makes my 4x2 scaffold, then, register (match images) each panel to the 4x2 scaffold (using previews for assistance), then run GradientMergeMosaic on the matched images). It seems to work well for the 3x2, but, falls apart when doing 4x2. It's not matching well, at all. No biggie, I will have to fix it up in Photoshop or weight via PixelMath on the pre-GMM'ed registered images using masks.
|
Ah, that's right! A fantastic target for a mosaic.
I've only tried my hand at a mosaic once (the recent Veil in Ha) and everything worked well. I nearly have enough data to complete a Ha/OIII bi-colour now so fingers crossed that it all goes together smoothly.
Cheers,
Rick.