|
Hi Martin,
white Pin 1 and Green pin 4 are Gnd ....pin 5 Yellow TX pin 6 Blue RX and we see no wires in the plug going to VPP+ which is pin 7 and Pin 8 as per the diagram in the EQ8 book the problem seems to be in the other end which you would need to open and take some pics and put them up here so we can see.
Where the wire that goes to the RJ45 plug is there a piece of heat shrink over a join ?
If so that might be where the problem is ! when they were making the cable ( Who ever made it ? ) .
Where did you buy the Cable from ?
Last edited by coldknights; 27-07-2014 at 07:09 PM.
|