Thread: [SOLD] Portable Pier For HEQ5 Pro
View Single Post
  #8  
Old 12-07-2014, 09:05 PM
RobC (Rob)
Registered User

RobC is offline 		 
Join Date: Apr 2012
Location: Woodford , Queensland , Australia
Posts: 219
Greg,

The head has a 60 mm hole for the HEQ5. This would have to be machined out to 66 mm to accept NEQ6. Not a big job.

I am just about to go to bed and I will send you some photos tomorrow.


Rob
Last edited by RobC; 12-07-2014 at 09:39 PM.