|
If it is for a DOB then outside walls need to be quite low. You may be able to cut off the bottom cone and drop it down to give 1 meter (?) high walls which should give you reasonable horizons.
Rotatable would need other options looking at, eg an internal low wall as I mentioned above.
Take measurements, lots of them. And some closeup pictures. Inside as well.
Cone height, outer wall depth, diameter opening dimensions, anything you can wrap a tape measure around.
Need to understand how robust the wall is or whether it would need bracing or whatever for rollers.
If it is just a welded plated steel sheet there will be a fair bit required to make it usable.
|